This document was adapted from Dagger Directives for a monorepo that uses Bazel Build, and is provided for ease of use in other organizations. Dagger Directives Bazel Build Contents This document is extensive, and while each directive is simple, the broader architecture they promote may be unclear; therefore, an end-to-end example is provided to aid comprehension, and the underlying architectural rationale is provided to link the individual directives to broader engineering principles. The sections are presented for ease of reference, with directives first; however, readers are encouraged to begin with whichever section they find most helpful. end-to-end example rationale Terminology The following definitions apply throughout this document: Component: An interface annotated with @Component Module: A class or interface annotated with @Module Scope: A custom annotation meta-annotated with @Scope Component: An interface annotated with @Component @Component Module: A class or interface annotated with @Module @Module Scope: A custom annotation meta-annotated with @Scope @Scope Component Structure and Scoping Directives for how components are defined, scoped, and related to one another. Practice: Library-Provided Components Libraries and generic utilities should provide components that expose their functionality and declare their component dependencies instead of only providing raw classes/interfaces. Positive Example: A Networking library provides a NetworkingComponent that exposes anOkHttpClient binding and depends on a CoroutinesComponent. Networking NetworkingComponent OkHttpClient CoroutinesComponent Negative Example: A Networking library that provides various interfaces and classes, but no component, and requires downstream consumers to define modules and components to wire them together. Networking This approach transforms Dagger components from details of the downstream application into details of upstream libraries. Instead of forcing consumers to understand a library's internal structure(and figure out how to instantiate objects), library authors provide complete, ready-to-use components that can be composed together and used to instantiate objects. This approach is analogous to plugging in a finished appliance instead of assembling a kit of parts: consumers just declare a dependency on the component (e.g. a fridge), supply the upstream components (e.g. electricity), and get the fully configured objects they need without ever seeing the wiring (e.g. cold drinks). This approach scales well, at the cost of more boilerplate. Practice: Narrow Scoped Components Components should export a minimal set of bindings, accept only the dependencies they require to operate (i.e. with @BindsInstance), and depend only on the components they require to operate. @BindsInstance Positive Example: A Feature component that depends only on Network and Database components, exposes only its public API (e.g. FeatureUi), and keeps its internal bindings hidden. Feature Network Database FeatureUi Negative Example: A Feature component that depends on a monolithic App component (which itself goes against the practice), exposes various bindings that could exist in isolation (e.g.FeatureUi, Clock, NetworkPorts and RpcBridge, IntegerUtil), and exposes its internal bindings. Feature App FeatureUi Clock NetworkPorts RpcBridge IntegerUtil This allows consumers to compose functionality with granular precision, reduces unnecessary configuration (i.e. passing instances/dependencies that are not used at runtime), and optimizes build times. This approach is consistent with the core tenets of the Interface Segregation Principle in that it ensures that downstream components can depend on the components they need, without being forced to depend on unnecessary components. Practice: Naked Component Interfaces Components should be defined as plain interfaces ("naked interfaces") without Dagger annotations, and then extended by annotated interfaces for production, testing, and other purposes. Downstream components should target the naked interfaces in their component dependencies instead of the annotated interfaces. Example: // Definition interface FooComponent { fun foo(): Foo } // Production Implementation @Component(modules = [FooModule::class]) interface ProdFooComponent : FooComponent // Testing Implementation @Component(modules = [FakeFooModule::class]) interface TestFooComponent : FooComponent { fun fakeFoo(): FakeFoo } @Component(dependencies = [FooComponent::class]) interface BarComponent { @Component.Builder interface Builder { fun consuming(fooComponent: FooComponent): Builder fun build(): BarComponent } } // Definition interface FooComponent { fun foo(): Foo } // Production Implementation @Component(modules = [FooModule::class]) interface ProdFooComponent : FooComponent // Testing Implementation @Component(modules = [FakeFooModule::class]) interface TestFooComponent : FooComponent { fun fakeFoo(): FakeFoo } @Component(dependencies = [FooComponent::class]) interface BarComponent { @Component.Builder interface Builder { fun consuming(fooComponent: FooComponent): Builder fun build(): BarComponent } } This ensures Dagger code follows general engineering principles (separation of interface and implementation). While Dagger components are interfaces, the presence of a `@Component` annotation implicitly creates an associated implementation (the generated Dagger code); therefore, depending on an annotated component forces a dependency on its implementation (at the build system level), and implicitly forces test code to depend on production code. By separating them, consumers can depend on a pure interface without needing to include the Dagger implementation in their class path, thereby preventing leaky abstractions, optimising build times, and directly separating production and test code into discrete branches. Standard: Custom Scope Required Components must be bound to a custom Dagger scope. Example: @FooScope @Component interface ProdFooComponent : FooComponent { fun foo(): Foo } @FooScope @Component interface ProdFooComponent : FooComponent { fun foo(): Foo } Unscoped bindings can lead to subtle bugs where expensive objects are recreated or shared state is lost. Explicit lifecycle management ensures objects are retained only as long as needed, thereby preventing these issues. Standard: Module Inclusion Restrictions Components must only include modules defined within their own package or its subpackages; however, they must never include modules from a subpackage if another component is defined in an intervening package. Example: Given the following package structure: src ├── a │ ├── AComponent │ ├── AModule │ ├── sub1 │ │ └── Sub1Module │ └── sub2 │ ├── Sub2Component │ └── sub3 │ └── Sub3Module └── b └── BModule src ├── a │ ├── AComponent │ ├── AModule │ ├── sub1 │ │ └── Sub1Module │ └── sub2 │ ├── Sub2Component │ └── sub3 │ └── Sub3Module └── b └── BModule AComponent may include AModule (same package) and Sub1Module (subpackage with no intervening component), but not Sub3Module (intervening Sub2Component in a.sub2) or BModule (not a subpackage of a). AComponent AModule Sub1Module Sub3Module Sub2Component a.sub2 BModule a This enforces strict architectural layering and prevents dependency cycles (spaghetti code), thereby ensuring proper component boundaries and maintainability. Practice: Dependencies Over Subcomponents Component dependencies should be used instead of subcomponents. Example: Foo depends on Bar via @Component(dependencies = [Bar::class]) rather than using@Subcomponent. Foo Bar @Component(dependencies = [Bar::class]) @Subcomponent While subcomponents are a standard feature of Dagger, prohibiting them favors a flat composition-based component graph, thereby reducing cognitive load, allowing components to be tested in isolation, and creating a more scalable architecture. Practice: Cross-Package Dependencies Components may depend on components from any package. Example: Foo in a.b can depend on Bar in x.y.z. Foo a.b Bar x.y.z Allowing components to depend on each other regardless of location promotes reuse, thereby fostering high cohesion within packages. Standard: Component Suffix Components must include the suffix Component in their name. Component Positive example: ConcurrencyComponent ConcurrencyComponent Negative example: Concurrency Concurrency This clearly distinguishes the component interface from the functionality it provides and prevents naming collisions. Standard: Scope Naming Convention The name of the custom scope associated with a component must inherit the name of the component (minus "Component") with "Scope" appended. Example: FooComponent is associated with FooScope. FooComponent FooScope Consistent naming allows contributors to immediately associate a scope with its component, thereby preventing conflicts and reducing split-attention effects. Standard: Builder Naming Component builders must be called `Builder`. Example: @Component interface FooComponent { @Component.Builder interface Builder { @BindsInstance fun binding(bar: Bar): Builder fun build(): FooComponent } } @Component interface FooComponent { @Component.Builder interface Builder { @BindsInstance fun binding(bar: Bar): Builder fun build(): FooComponent } } Standardizing builder names allows engineers to predict the API surface of any component, thereby reducing the mental overhead when switching between components. Standard: Binding Function Naming Component builder functions that bind instances must be called `binding`; however, when bindings use qualifiers, the qualifier must be appended. Example: @Component interface ConcurrencyComponent { @Component.Builder interface Builder { // Unqualified @BindsInstance fun binding(bar: Bar): Builder // Qualified @BindsInstance fun bindingIo(@Io scope: CoroutineScope): Builder @BindsInstance fun bindingMain(@Main scope: CoroutineScope): Builder fun build(): ConcurrencyComponent } } @Component interface ConcurrencyComponent { @Component.Builder interface Builder { // Unqualified @BindsInstance fun binding(bar: Bar): Builder // Qualified @BindsInstance fun bindingIo(@Io scope: CoroutineScope): Builder @BindsInstance fun bindingMain(@Main scope: CoroutineScope): Builder fun build(): ConcurrencyComponent } } Explicit naming immediately clarifies the mechanism of injection (instance binding vs component dependency), thereby preventing collisions when binding multiple instances of the same type. Standard: Dependency Function Naming Component builder functions that set component dependencies must be called `consuming`. Example: @Component(dependencies = [Bar::class]) interface FooComponent { @Component.Builder interface Builder { fun consuming(bar: Bar): Builder fun build(): FooComponent } } @Component(dependencies = [Bar::class]) interface FooComponent { @Component.Builder interface Builder { fun consuming(bar: Bar): Builder fun build(): FooComponent } } Distinct naming clearly separates structural dependencies (consuming) from runtime data (binding), thereby making the component's initialization logic self-documenting. Standard: Provision Function Naming Component provision functions must be named after the type they provide (in camelCase). However, when bindings use qualifiers, the qualifier must be appended to the function name. Example: @Component interface FooComponent { // Unqualified fun bar(): Bar // Qualified @Io fun genericIo(): Generic @Main fun genericMain(): Generic } @Component interface FooComponent { // Unqualified fun bar(): Bar // Qualified @Io fun genericIo(): Generic @Main fun genericMain(): Generic } This ensures consistency and predictability in the component's public API. Factory Functions Requirements for the factory functions that instantiate components for ease of use. Standard: Factory Function Required Components must have an associated factory function that instantiates the component. Example: @Component(dependencies = [Quux::class]) interface FooComponent { // ... } fun fooComponent(quux: Quux = DaggerQuux.create(), qux: Qux): FooComponent = DaggerFooComponent.builder() .consuming(quux) .binding(qux) .build() @Component(dependencies = [Quux::class]) interface FooComponent { // ... } fun fooComponent(quux: Quux = DaggerQuux.create(), qux: Qux): FooComponent = DaggerFooComponent.builder() .consuming(quux) .binding(qux) .build() This integrates cleanly with Kotlin, thereby significantly reducing the amount of manual typing required to instantiate components. Exception: Components that are file private may exclude the factory function (e.g. components defined in tests for consumption in the test only). Standard: Default Component Dependencies Factory functions must supply default arguments for parameters that represent component dependencies. Example: fun fooComponent(quux: Quux = DaggerQuux.create(), ...) fun fooComponent(quux: Quux = DaggerQuux.create(), ...) Providing defaults for dependencies allows consumers to focus on the parameters that actually vary, thereby improving developer experience and reducing boilerplate. Practice: Production Defaults The default arguments for component dependency parameters in factory functions should be production components, even when the component being assembled is a test component. Example: fun testFooComponent(quux: Quux = DaggerQuux.create(), ...) fun testFooComponent(quux: Quux = DaggerQuux.create(), ...) This ensures tests exercise real production components and behaviours as much as possible, thereby reducing the risk of configuration drift between test and production environments. Practice: Factory Function Location Factory functions should be defined as top-level functions in the same file as the component. Example: fooComponent() function in same file as FooComponent interface. fooComponent() FooComponent Co-locating the factory with the component improves discoverability. Practice: Factory Function Naming Factory function names should match the component, but in lower camel case. Example: FooComponent component has fun fooComponent(...) factory function. FooComponent fun fooComponent(...) This ensures factory functions can be matched to components easily. Practice: Default Non-Component Parameters Factory functions should supply default arguments for parameters that do not represent component dependencies (where possible). Example: fun fooComponent(config: Config = Config.DEFAULT, ...) fun fooComponent(config: Config = Config.DEFAULT, ...) Sensible defaults allow consumers to only specify non-standard configuration when necessary, thereby reducing cognitive load. Modules and Build Targets Directives regarding Dagger modules and their placement in build targets. Standard: Separate Module Targets Modules must be defined in separate build targets to the objects they provide/bind. Example: BarModule in separate build target from Baz implementation. BarModule Baz Separating implementation from interface/binding prevents changing an implementation from invalidating the cache of every consumer of the interface, thereby improving build performance.Additionally, it ensures consumers can depend on individual elements independently (crucial forHilt) and allows granular binding overrides in tests. Standard: Dependency Interfaces Modules must depend on interfaces rather than implementations. Example: BarModule depends on Baz interface, not BazImpl. BarModule Baz BazImpl This enforces consistency with the dependency inversion principle, thereby decoupling the module and its bindings from concrete implementations. Testing Patterns Patterns for defining components used in testing to ensure testability. Standard: Test Component Extension Test components must extend production components. Example: interface TestFooComponent : FooComponent interface TestFooComponent : FooComponent Tests should operate on the same interface as production code (Liskov Substitution), thereby ensuring that the test environment accurately reflects production behavior. Practice: Additional Test Bindings Test components should export additional bindings. Example: TestFooComponent component extends FooComponent and additionally exposes fun testHelper(): TestHelper. TestFooComponent FooComponent fun testHelper(): TestHelper Exposing test-specific bindings allows tests to inspect internal state or inject test doubles without compromising the public production API, thereby facilitating white-box testing where appropriate. Rationale The directives in this document work together to promote an architectural pattern for Dagger that follows foundational engineering best practices and principles, which in turn supports sustainable development and improves the contributor experience. The core principles are: Interface Segregation Principle (ISP): Downstream consumers should be able to depend on the minimal API required for their task without being forced to consume/configure irrelevant objects. This reduces cognitive overhead for both maintainers and consumers, and lowers computational costs at build time and runtime. It's supported by directives such as the "Narrow Scoped Components" practice, which calls for small granular components instead of large God Objects, and the "Dependencies Over Subcomponents" practice, which encourages composition over inheritance. Dependency Inversion Principle: High-level elements should not depend on low-level elements; instead, both should depend on abstractions. This reduces the complexity and scope of changes by allowing components to evolve independently and preventing unnecessary recompilation (in a complex build system such as Bazel). It's supported by the "Naked Component Interfaces" directive, which requires the use of interfaces rather than implementations, and the "Module Inclusion Restrictions" standard, which enforces strict architectural layering. Abstraction and Encapsulation: Complex subsystems should expose simple, predictable interfaces that hide their internal complexity and configuration requirements. This allows maintainers and consumers to use and integrate components without deep understanding of the implementation. It's supported by the "Factory Function Required" standard, which encourages simple entry points, and "Default Component Dependencies", which provides sensible defaults to eliminate "Builder Hell". Liskov Substitution Principle (LSP): Objects of a superclass must be replaceable with objects of its subclasses without breaking the application. This ensures test doubles can be seamlessly swapped in during tests, thereby improving testability without requiring changes to production code, and ensuring as much production code is tested as possible. It's supported by the "Test Component Extension" standard, which mandates that test components inherit from production component interfaces. Compile-Time Safety (Poka-Yoke): The system is designed to prevent misconfiguration errors (i.e. "error-proofing"). By explicitly declaring component dependencies in the component interface, Dagger enforces their presence at compile time, and fails if they are missing. This gives consumers a clear, immediate signal of exactly what is missing or misconfigured, rather than failing obscurely at runtime. It's supported by the "Library-Provided Components" practice, which mandates fully declared dependencies, and the "Factory Function Required" standard, which mechanically ensures all requirements are satisfied effectively. Interface Segregation Principle (ISP): Downstream consumers should be able to depend on the minimal API required for their task without being forced to consume/configure irrelevant objects. This reduces cognitive overhead for both maintainers and consumers, and lowers computational costs at build time and runtime. It's supported by directives such as the "Narrow Scoped Components" practice, which calls for small granular components instead of large God Objects, and the "Dependencies Over Subcomponents" practice, which encourages composition over inheritance. Dependency Inversion Principle: High-level elements should not depend on low-level elements; instead, both should depend on abstractions. This reduces the complexity and scope of changes by allowing components to evolve independently and preventing unnecessary recompilation (in a complex build system such as Bazel). It's supported by the "Naked Component Interfaces" directive, which requires the use of interfaces rather than implementations, and the "Module Inclusion Restrictions" standard, which enforces strict architectural layering. Abstraction and Encapsulation: Complex subsystems should expose simple, predictable interfaces that hide their internal complexity and configuration requirements. This allows maintainers and consumers to use and integrate components without deep understanding of the implementation. It's supported by the "Factory Function Required" standard, which encourages simple entry points, and "Default Component Dependencies", which provides sensible defaults to eliminate "Builder Hell". Liskov Substitution Principle (LSP): Objects of a superclass must be replaceable with objects of its subclasses without breaking the application. This ensures test doubles can be seamlessly swapped in during tests, thereby improving testability without requiring changes to production code, and ensuring as much production code is tested as possible. It's supported by the "Test Component Extension" standard, which mandates that test components inherit from production component interfaces. Compile-Time Safety (Poka-Yoke): The system is designed to prevent misconfiguration errors (i.e. "error-proofing"). By explicitly declaring component dependencies in the component interface, Dagger enforces their presence at compile time, and fails if they are missing. This gives consumers a clear, immediate signal of exactly what is missing or misconfigured, rather than failing obscurely at runtime. It's supported by the "Library-Provided Components" practice, which mandates fully declared dependencies, and the "Factory Function Required" standard, which mechanically ensures all requirements are satisfied effectively. Overall, this architecture encourages and supports granular, maintainable components that can be evolved independently and composed together into complex structures. Components serve as both the public API for utilities, the integration system that ties elements together within utilities, and the composition system that combines utilities together. For upstream utility maintainers, this reduces boilerplate and reduces the risk of errors; for downstream utility consumers, this creates an unambiguous and self-documenting API that can be integrated without knowledge of implementation details; and for everyone, it distributes complexity across the codebase and promotes high cohesion(i.e. components defined nearest to the objects they expose). All together, this fosters sustainable development by reducing cognitive and computational load.The disadvantages of this approach and a strategy for mitigation are discussed in the[future work](#future-work) appendix. #future-work End to End Example The following example demonstrates a complete Dagger setup and usage that adheres to all the directives in this document. It features upstream (User) and downstream (Profile) components, separate modules for production and testing (including fake implementations), and strict separation of interface and implementation via naked component interfaces. User Feature Common elements: /** Custom Scope */ @Scope @Retention(AnnotationRetention.RUNTIME) annotation class UserScope /** Domain Interface */ interface User /** Naked Component */ interface UserComponent { fun user(): User } /** Custom Scope */ @Scope @Retention(AnnotationRetention.RUNTIME) annotation class UserScope /** Domain Interface */ interface User /** Naked Component */ interface UserComponent { fun user(): User } Production elements: /** Real Implementation */ @UserScope class RealUser @Inject constructor() : User /** Production Module */ @Module interface UserModule { @Binds fun bind(impl: RealUser): User companion object { @Provides fun provideTimeout() = 5000L } } /** Production Component */ @UserScope @Component(modules = [UserModule::class]) interface ProdUserComponent : UserComponent { @Component.Builder interface Builder { fun build(): ProdUserComponent } } /** Production Factory Function */ fun userComponent(): UserComponent = DaggerProdUserComponent.builder().build() /** Real Implementation */ @UserScope class RealUser @Inject constructor() : User /** Production Module */ @Module interface UserModule { @Binds fun bind(impl: RealUser): User companion object { @Provides fun provideTimeout() = 5000L } } /** Production Component */ @UserScope @Component(modules = [UserModule::class]) interface ProdUserComponent : UserComponent { @Component.Builder interface Builder { fun build(): ProdUserComponent } } /** Production Factory Function */ fun userComponent(): UserComponent = DaggerProdUserComponent.builder().build() Test elements: /** Fake Implementation */ @UserScope class FakeUser @Inject constructor() : User /** Fake Module */ @Module interface FakeUserModule { @Binds fun bind(impl: FakeUser): User } /** Test Component */ @UserScope @Component(modules = [FakeUserModule::class]) interface TestUserComponent : UserComponent { fun fakeUser(): FakeUser @Component.Builder interface Builder { fun build(): TestUserComponent } } /** Test Factory Function */ fun testUserComponent(): TestUserComponent = DaggerTestUserComponent.builder().build() /** Fake Implementation */ @UserScope class FakeUser @Inject constructor() : User /** Fake Module */ @Module interface FakeUserModule { @Binds fun bind(impl: FakeUser): User } /** Test Component */ @UserScope @Component(modules = [FakeUserModule::class]) interface TestUserComponent : UserComponent { fun fakeUser(): FakeUser @Component.Builder interface Builder { fun build(): TestUserComponent } } /** Test Factory Function */ fun testUserComponent(): TestUserComponent = DaggerTestUserComponent.builder().build() Profile Feature Common elements: /** Custom Scope */ @Scope @Retention(AnnotationRetention.RUNTIME) annotation class ProfileScope /** Domain Interface */ interface Profile /** Naked Component */ interface ProfileComponent { fun profile(): Profile } /** Custom Scope */ @Scope @Retention(AnnotationRetention.RUNTIME) annotation class ProfileScope /** Domain Interface */ interface Profile /** Naked Component */ interface ProfileComponent { fun profile(): Profile } Production elements: ** Real Implementation */ @ProfileScope class RealProfile @Inject constructor( val user: User, private val id: ProfileId ) : Profile { data class ProfileId(val id: String) } /** Production Module */ @Module interface ProfileModule { @Binds fun bind(impl: RealProfile): Profile } /** Production Component */ @ProfileScope @Component(dependencies = [UserComponent::class], modules = [ProfileModule::class]) interface ProdProfileComponent : ProfileComponent { @Component.Builder interface Builder { fun consuming(user: UserComponent): Builder @BindsInstance fun binding(id: ProfileId): Builder fun build(): ProdProfileComponent } } /** Production Factory Function */ fun profileComponent( user: UserComponent = userComponent(), id: ProfileId = ProfileId("prod-id") ): ProfileComponent = DaggerProdProfileComponent.builder().consuming(user).binding(id).build() ** Real Implementation */ @ProfileScope class RealProfile @Inject constructor( val user: User, private val id: ProfileId ) : Profile { data class ProfileId(val id: String) } /** Production Module */ @Module interface ProfileModule { @Binds fun bind(impl: RealProfile): Profile } /** Production Component */ @ProfileScope @Component(dependencies = [UserComponent::class], modules = [ProfileModule::class]) interface ProdProfileComponent : ProfileComponent { @Component.Builder interface Builder { fun consuming(user: UserComponent): Builder @BindsInstance fun binding(id: ProfileId): Builder fun build(): ProdProfileComponent } } /** Production Factory Function */ fun profileComponent( user: UserComponent = userComponent(), id: ProfileId = ProfileId("prod-id") ): ProfileComponent = DaggerProdProfileComponent.builder().consuming(user).binding(id).build() Test elements: /** Test Component */ @ProfileScope @Component(dependencies = [UserComponent::class], modules = [ProfileModule::class]) interface TestProfileComponent : ProfileComponent { @Component.Builder interface Builder { fun consuming(user: UserComponent): Builder @BindsInstance fun binding(id: ProfileId): Builder fun build(): TestProfileComponent } } /** Test Factory Function */ fun testProfileComponent( user: UserComponent = userComponent(), id: ProfileId = ProfileId("test-id") ): TestProfileComponent = DaggerTestProfileComponent.builder().consuming(user).binding(id).build() /** Test Component */ @ProfileScope @Component(dependencies = [UserComponent::class], modules = [ProfileModule::class]) interface TestProfileComponent : ProfileComponent { @Component.Builder interface Builder { fun consuming(user: UserComponent): Builder @BindsInstance fun binding(id: ProfileId): Builder fun build(): TestProfileComponent } } /** Test Factory Function */ fun testProfileComponent( user: UserComponent = userComponent(), id: ProfileId = ProfileId("test-id") ): TestProfileComponent = DaggerTestProfileComponent.builder().consuming(user).binding(id).build() Usage Example of production component used in production application: class Application { fun main() { // Automatically uses production implementations (RealUser, RealProfile) val profile = profileComponent().profile() // ... } } class Application { fun main() { // Automatically uses production implementations (RealUser, RealProfile) val profile = profileComponent().profile() // ... } } Example of production profile component used with test user component in a test: @Test fun testProfileWithFakeUser() { // 1. Setup: Create the upstream test component (provides FakeUser) val fakeUserComponent = testUserComponent() val fakeUser = fakeUserComponent.fakeUser() // 2. Act: Inject it into the downstream test component val prodProfileComponent = profileComponent(user = fakeUserComponent) val profile = prodProfileComponent.profile() // 3. Assert: Verify integration assertThat(profile.user).isEqualTo(fakeUser) } @Test fun testProfileWithFakeUser() { // 1. Setup: Create the upstream test component (provides FakeUser) val fakeUserComponent = testUserComponent() val fakeUser = fakeUserComponent.fakeUser() // 2. Act: Inject it into the downstream test component val prodProfileComponent = profileComponent(user = fakeUserComponent) val profile = prodProfileComponent.profile() // 3. Assert: Verify integration assertThat(profile.user).isEqualTo(fakeUser) } Future Work The main disadvantage of the pattern this document encodes is the need for a final downstream assembly of components, which can become boilerplate heavy in deep graphs. For example: fun main() { // Level 1: Base component val core = coreComponent() // Level 2: Depends on Core val auth = authComponent(core = core) val data = dataComponent(core = core) // Level 3: Depends on Auth, Data, AND Core val feature = featureComponent(auth = auth, data = data, core = core) // Level 4: Depends on Feature, Auth, AND Core val app = appComponent(feature = feature, auth = auth, core = core) } fun main() { // Level 1: Base component val core = coreComponent() // Level 2: Depends on Core val auth = authComponent(core = core) val data = dataComponent(core = core) // Level 3: Depends on Auth, Data, AND Core val feature = featureComponent(auth = auth, data = data, core = core) // Level 4: Depends on Feature, Auth, AND Core val app = appComponent(feature = feature, auth = auth, core = core) } A tool to reduce this boilerplate has been designed, and implementation is tracked by this issue. this issue
